Contact seller
I have this ad posted on Craigslist in the SF Bay Area California. I would like to sell locally but will ship.
Parting out 340 engine, I am keeping the block and going with a stroker setup. Bought it used and found the pistons were installed incorrectly and the valves hit the pistons. I was told that it was rebuilt and run a very short time in the car. Machine shop looked at the internals and said the pistons, rods, lifters, rockers, rods, cam, oil pump, wind age tray, can be re-used.
Block is not for sale. I included pictures to show how clean the cylinders were after disassembly.
Pistons: .030 TRW
Crank: not available at the moment, being inspected for damage.
Heads: being magnafluxed this week, will see if the valves are ok or not. I will sell separately for $450 if they check out good.
Cam: I don’t know the cam specs.
Oil pan is straight and clean. Intake is an Edelbrock Torker 340.
Would prefer to sell the entire lot minus the heads for $750 but will sell parts separately if there is no interest in the lot.
Parting out 340 engine, I am keeping the block and going with a stroker setup. Bought it used and found the pistons were installed incorrectly and the valves hit the pistons. I was told that it was rebuilt and run a very short time in the car. Machine shop looked at the internals and said the pistons, rods, lifters, rockers, rods, cam, oil pump, wind age tray, can be re-used.
Block is not for sale. I included pictures to show how clean the cylinders were after disassembly.
Pistons: .030 TRW
Crank: not available at the moment, being inspected for damage.
Heads: being magnafluxed this week, will see if the valves are ok or not. I will sell separately for $450 if they check out good.
Cam: I don’t know the cam specs.
Oil pan is straight and clean. Intake is an Edelbrock Torker 340.
Would prefer to sell the entire lot minus the heads for $750 but will sell parts separately if there is no interest in the lot.