340 Intake

[halibut]

Looking for a stock 68-70 340 intake.
71 Swinger in NC

 

[cudamark]

'70 is a little different but I have both types. PM me with your shipping address and I'll get you a delivered price.
Thanks, Mark

 

[badlilred79]

'70 is a little different but I have both types. PM me with your shipping address and I'll get you a delivered price.
Thanks, Mark

if that falls apart i ve got them too

 

[jeffneal66]

I have one too.

 

[mopeman]

i have a 68 stock manifold

 

[wyoduster]

any of these it???

 

[cudamark]

any of these it???

Maybe the one on the far left. If the casting number starts with 25 it's a '68-9, if it starts with 34 it's a '70. There is a date code also if you need to get more specific.
Thanks, Mark

 

[halibut]

I'm at 125 Doe Run Drive
Sanford NC 27330-7991

 

[halibut]

any of these it???

The on on the left is it! Of the others (Spread bore) I'm also looking for a pre 74(non EGR)
How about both
125 Doe Run drive
Sanford NC 27330-7991

 

[1968FormulaS340]

The on on the left is it! Of the others (Spread bore) I'm also looking for a pre 74(non EGR)
How about both
125 Doe Run drive
Sanford NC 27330-7991

The one on the left is also a Spread-bore. (But it is the correct, early 340 style).

 

[wyoduster]

The one on the left is also a Spread-bore. (But it is the correct, early 340 style).

Yea it did come off my old 340. replaced with eddy. make me an offer.

 

[halibut]

Yea it did come off my old 340. replaced with eddy. make me an offer.

68-69 should have a p/n or casting # of 2531914 or 2531915
70 would be 3512847/3512848
71 (spread bore) is 3512099/3512100
72 is 3671878
hope this helps.
I'm looking at the square bore for a 71 340 which is in my dart
the spread bore is to go on my 78 LRT
Your bottom line???