340 main caps

-
Status
Not open for further replies.
I have a single NOS semi-finished Mopar Performance cap for #1,2 or 4 positions if you can't find a complete set.
 
i bought a block with no main caps. i plan on installing 4 bolt splayed mains in it anyway (for a stroker im building) however i still need the two outer caps. i havent found anyplace that sells a hole set or the 2 outer caps. if you know where i can get them let me know.


if not i still need a set or the 2 outer mains



thanks
 
Ok, so I got the new #1 cap but you may end up having to buy a used #5 cap from someone has a broken block. I believe 318 caps are weaker/different but not sure of any differences on #5.

Everything will have to be line bored and honed regardless of what you end up with.
 
I have a 318 rear cap if you can use it and if you get the #1 cap from Myron aka Locomotion, you'll be set. I think Myron is correct in that the 318/340 #5 caps are the same. The 1-4 caps are a little shorter in height and and a little thinner.

Ken
Edison, NJ
 
I think it was milodon that sells a billet version of the caps in a set
 
Status
Not open for further replies.
-

Back
Top