srt8
Member
340 bored .30 over o-ringed with copper head gaskets,stock steel crank,eagle H beam rods and JE forged dished pistons 7.5:1 compression.Heads are unported w2 race heads o-ringed to match block 2.02 ,1.60 valves huges racing engines springs and push rods to match huges racing cam and a double roller timing chain.The cam lift is in the high upper .500 ill have to check my cam card. The intake is an air gap holley strip denominator to match heads with a bg / pro form main body carb, accel distributor and wires, Mopar performance high volume oil pump, morroso 7 quart pan and Mopar black wrinkly valve covers.Transmission is a stock 727 with a b&m street heat 2800 stall converter.Also have a set of TRW flat top pistons to go with the motor. $3500 o.b.o.
