340 motor mount orientation

[moparfanatic56]

I am sure this has been asked before but what is the correct orientation for the motor mounts on a 340, picture 1 or picture 2 this for an a body.

 

[DC Dart]

Do you have a bent 318 mounting bracket on a 340?

 

[moparfanatic56]

I got these from another member that said they were 340 mounts a few years ago

 

[toolmanmike]

To the rear of the tabs on the block.

 

[moparfanatic56]

To the rear of the tabs on the block.

So the top picture, that's what I thought but wanted to be sure.
Thanks

 

[doug 371]

1

 

[4spdragtop]

Lol, this made me notice I didn't fully tighten them, so thank you!
1st is ds, 2nd ps.

 

[oldkimmer]

Pic 1, but u have a B,C,E body mount on the drivers side. Kim

 

[CFD244]

Lol, this made me notice I didn't fully tighten them, so thank you!
1st is ds, 2nd ps.

View attachment 1716246860

View attachment 1716246861

Steve, that puppy looks like it's about ready to fire!

 

[4spdragtop]

Thanks Troy, young lads gonna drop by and we'll finish it up. I hassled TTi today and our kit hasn't shipped yet... Packing/shipping dude is backed up...

Steve, that puppy looks like it's about ready to fire!

 

[moparfanatic56]

Pic 1, but u have a B,C,E body mount on the drivers side. Kim

Are you kidding me, do you happen to have a picture of the correct mount, I was told by the member that sold them to me they were a body 340 mounts

 

[4eighteener]

Don't the mounting brackets go behind the ears on the driver's side, and in front of the ears on the passenger side. The photo also shows the passenger side behind the block ears

 

[4spdragtop]

In 1st pic can you remove/flip the isolator? It looks like it's sticking way out beyond the bracket?

I am sure this has been asked before but what is the correct orientation for the motor mounts on a 340, picture 1 or picture 2 this for an a body.

View attachment 1716246747

View attachment 1716246748

Are you kidding me, do you happen to have a picture of the correct mount, I was told by the member that sold them to me they were a body 340 mounts

 

[str12-340]

Look at the mount shape in post#7 (which is correct) compared to the picture of yours. I agree that there is something hinky (that's a technical term...) about yours compared to the NOS mounts that I have on the shelf.

 

[glenn340]

These are correct for abody 340.

 

[Baines]

What's the "D" on the nuts stand for?

 

[Oldmanmopar]

When installing them. Always install the bolt with a flat washer on it through the block ear first then through the bracket with a Interference nut against the bracket and no washer on the bracket side. "Never use a lock washer". If you cannot find the original interference fit nut then use a top lock . Nylocks will get to hot in that area and will lose there plastic locking hold.

 

[oldkimmer]

Are you kidding me, do you happen to have a picture of the correct mount, I was told by the member that sold them to me they were a body 340 mounts

A body mounts have the bolt hole at the front of the mount. Post 15 is showing the proper 340 motor mounts. Kim