360 Motor Mounts

-
middleagecrisis said:
I saw these on Rock Auto and am wondering if these are truly for a 360 or just 318 mounts incorrectly labeled? Anybody know?
1975 PLYMOUTH DUSTER 5.9L 360cid V8 Motor Mount | Shop Now at RockAuto
I've got to get new motor mounts when I swap the 318 for the 360, so I'd prefer to buy the correct ones, if possible.
Click to expand...
Westar(sp?) gives OE numbers and does show that the left side is different than the right side. IF those are the actual pictures that is. seems like a steel (ha-ha), could get them and replace the probably mushy rubber inserts with urethane ones.
 
I've run into this. I think the same part no. is substituted across much of the parts industry. But you CAN just bend the ears to make up the width difference. They are not that thick. I have forgotten how to deal with these, I think you need to drill another hole?
 
I believe the universal fix is a bushing or stack of washers. I’ll probably end up using a steel bushing. I got 360 mounts with the engine, but it came out of an E-body and I was told those mounts wouldn’t work on an A-body.
 

You must log in or register to reply here.
-
Back
Top Bottom