[SOLD] 340 parts

[Sedanman]

6/16/71 vin#2B306416 std bore 340 bare block & 1.88 915 heads with valves & springs (no rockers or shafts) $425 obo

2 aluminum right angle oil filter adapters with bolt $30 ea

I have a set of 4 bolt main caps for 340. $50

4 windage tray bolts for small block $25

shipping is extra.... I am willing to trade for some things I need like

8 3/4 matched usable rear brake set up for 10" or 11" BBP

67 radio antenna,I have the nut & bezel

a good 70-2 v8 22" radiator & shroud if possible

670 Holley street avenger carb

 

[4spdragtop]

pm sent

 

[HemiEd]

PM sent on adapter.

 

[Sedanman]

1 adapter gone.Thanks Ed

 

[Sedanman]

block is gone

 

[Sedanman]

Still have the 915 heads w/ 1.88 valves,1 filter adapter,4 bolt caps & tray bolts

 

[Sedanman]

$150 obo on the heads & pick up would be nice

 

[discharger1332]

that is a vary nice signet you have there. i was trying to buy it when the kid you got it from bought it from. when justin said he was going to check out the engine for you, i was more than happy to get a closer look at it. i also have a 67 signet, and i sold justin his about ten years ago. its my favorite mopar across the board. good luck with your build.

 

[Cudaroy]

I'll take the other filter adapter.....PM sent

 

[Sharko]

Just wanted to say thanks for the great deal on the 340 block its just what I've been looking for, and thanks again Chuck.:burnout:

 

[racincuda]

wood like info on heads pleze

 

[dgoplen]

i have a set of rear 11 x2.5 backing plates with brakes installed <but need changed>id swap for the heads if interested?

 

[Sedanman]

They were on a 360 I stripped & have 188/160 valves.
dgoplen,do you have the drums as well? All thats left are the complete heads

 

[dgoplen]

i dont have the drums but they are easy to find at local parts house ,i am not sure if these are 2 or 2.5 but i believe the backing plates will work for 2 or 2.5 just make sure the drums are the same.all the bhardwar i sinstalled on these. if interested i can go measure exactly what they are.i am in sw wisconsin zip 53581 . tks scott

 

[4speeddemon]

still have the 4 bolt main caps?

 

[Sedanman]

caps,adapter & bolts are gone

 

[dustUoff]

Do you still have the heads? If so, what do you think the shipping would be to Dallas? 75019. Let me know, thanks!

 

[eschroeder1]

Do you still have the windage tray bolts? If so, how much shipped to 78612