[SOLD] 340 throttle and gas pedal assembly

-
Status
Not open for further replies.

cuda67man

Well-Known Member
Joined
Mar 7, 2018
Messages
741
Reaction score
450
Location
upstate
Rating - 97.2%
35   1   0
Contact seller
this was taken off a 69 barracuda with 340 years ago. gas pedal with felt/cable/and linkage with bracket and slides. suppose this would fit alot of other setups as well 50 plus ship

IMG_20200308_233635.jpg


IMG_20200308_233627.jpg


IMG_20200308_233646.jpg
 
Last edited:
well Jim it was on the 340 that was in the car. if it was changed at some point I don't know. I would assume if its on a 340 it will work on a 318/ 360/ 273 just the same or am I incorrect?
 
4bbl pics. Ur linkage may have worked, but not properly, but it isnt right by far. That is 2 bbl stuff from the mid to late 70s. Kim

View attachment 1715484433

View attachment 1715484434

View attachment 1715484435

View attachment 1715484436

View attachment 1715484437

View attachment 1715484438
well it was hooked up to the stock 4 barrel the car came with Kim and was working fine and everything lined up on it so it def wasn't hooked to a 2 barrel. I changed it out when I pulled the motor for something else and added a dual quad.
 

2 BBL vs 4BBL the left extends up and toward the carb correcting the geometry for the cable to connect to the carb.
upload_2020-3-9_18-34-59.jpeg
 
Shoot I had to look twice to see the black bracket(2 bl) in behind. The OPs bracket looks same as your blue one? But his linkage(long slotted piece) looks similar to yours? That part is 2 bl I believe.
Could be, I was trying to show the difference in the bracket. My goof, good catch though.
 
Shoot I had to look twice to see the black bracket(2 bl) in behind. The OPs bracket looks same as your blue one? But his linkage(long slotted piece) looks similar to yours? That part is 2 bl I believe.
I think I actually stole that picture from either here or fbay
 
Status
Not open for further replies.
-
Back
Top Bottom