360 Oil Filters?

[Woody500]

The photos shows you already have the 90° adapter.
It looks like if you re-routed those hard lines, you could swivel 90° adapter away from the headers and use the filter you had.
And some of those bends look tighter than 90°, and might be a restriction so start there.

 

[TXOval]

Why not re-bend those cooler lines so that you have room?

 

[Infiniti Dave]

The clearance issue is between the block and the headers. The Mopar filter is 3.66"in diameter and won't make it. Solved the problem with a Napa Gold #1348 per a previous poster. Thank you all for the help and advice.

 

[furrystump]

The photos shows you already have the 90° adapter.
It looks like if you re-routed those hard lines, you could swivel 90° adapter away from the headers and use the filter you had.
And some of those bends look tighter than 90°, and might be a restriction so start there.

There’s no 90 deg adapter there. Fun tidbit 2005 Audi A4 1.8T Quattro runs the same filter as my 340.

 

[Woody500]

There’s no 90 deg adapter there. Fun tidbit 2005 Audi A4 1.8T Quattro runs the same filter as my 340.

Yes. I looked more closely & you're right. Must've looked at header wrong. Thanks.
He still does still need to rebend those lines, because filter is Too Close to the header & oil will cook. And those bends are definitely restrictive, over bent like they are.

 

[Infiniti Dave]

You're correct,the end of the filter is way too close to the header tube. The Napa filters I purchased are a few inches shorter and I believe will solve the issue. Thanks again to everyone for all the valuable thoughts.