[WANTED] 440 crank shaft pulley

[unknownsnake]

Looking for a crankshaft pulley prefer a two groove one. I have a 4 groove one right now and won't look good having two empty grooves. :happy1:

 

[barracudakid]

i have that

 

[unknownsnake]

keep in mind new ones are 70 bucks before anyone else throws out a crazy number :/

 

[Darter6]

Check to see if the 4 groove pully is pressed together.It may be able to be seperated. I took one to the machine shop to have the outer grooves removed on a lathe. Just a thought.

 

[bridge16354]

i wouldn't do that,for a non-A.C.application the second groove runs the fan and alternator and the third groove runs the P.S. how's 50.00 shipped sound?

 

[unknownsnake]

wait so what goes on the first groove then? :/

 

[bridge16354]

wait so what goes on the first groove then? :/

four groove pulleys were used with A.C. and the first two grooves ran the compressor and the alternator,if you compare pulleys you'll see the first groove on the two groove pulley lines up with the second groove on the four groove pulley,non-A.C.applications space the alternator out a little further than A.C.applications.

 

[dodge71demon]

I was just looking at mine last night had different ones - one had both pulleys the same diameter one had different diameters smaller on the back pulley. The one that was the same hit the water pump pulley

 

[unknownsnake]

ok I thought I had it figured out but you have me lost. So I only need a two groove to run power steering right?

 

[dodge71demon]

ok I thought I had it figured out but you have me lost. So I only need a two groove to run power steering right?

Correct -- one runs the water pump and alternator the other power steering pump