440 oil pan dimples filler ?

[alex perini]

What can I fill the dimples on my 440 pan with so I can use a mr gasket windage tray with rubber gasket ?

 

[jaws]

You sandwich the windage tray between two gaskets.

 

[alex perini]

You sandwich the windage tray between two gaskets.

It's one of them gasket tray combos with rubber seal

 

[72Dart6pack]

Weld them up. Then grind them smooth.

 

[Ddaddy]

Get a new pan made for the windage tray.

 

[diymirage]

Whoop em
Turn that pan upside down, put a piece of metal on there and whoop em

 

[d55dave]

I dont see what problem the dimples would pose. They seal just fine against the bottom of the block. Pan, gasket, windage tray, gasket, block and a moderate amount of sealant and bolt it together.

 

[1969383S]

Agree, if you are talking about the small ripples side to side the gaskets cover that. Any windage pan requires two gaskets period. One above and one below the windage tray.

 

[alex perini]

Agree, if you are talking about the small ripples side to side the gaskets cover that. Any windage pan requires two gaskets period. One above and one below the windage tray.

 

[alex perini]

View attachment 1715161256

This windage tray has two rubber seals on both sides but says it's for flat surface oil pans