5.2 Magnum Valve Springs?

[Rockerdude]

Hey guys, I'm buttoning up my Magnum build for my Wagon and I'm having a hell of a time trying to find some valve springs that will work with my .496/496 lift hydraulic roller cam. Can someone point me to which ones will be adequate? Thanks!

 

[jos51700]

Call Hughes, spend the coin on beehives. You'll love it.

 

[Dodge74]

DEDO!!! Dave and the guys know there **it

 

[Abodybomber]

Buy the spring/retainer combo,about 150 total.The springs are capable of .530 - .550 lift,stock guides hit at aout .510.

 

[RustyRatRod]

I am using this spring http://www.hughesengines.com/Index/...OSk=&level1=VmFsdmUgU3ByaW5ncw==&partid=10280
and this retainer http://www.hughesengines.com/Index/...ZXJzLCBMb2NrcyAmIEFjY2Vzc29yaWVz&partid=23197
and these locks http://www.hughesengines.com/Index/...ZXJzLCBMb2NrcyAmIEFjY2Vzc29yaWVz&partid=25636
on my 318 with Magnum heads.

 

[Rockerdude]

I called Hughes and the springs and retainers shipped will be just over $170. I'm going to save up and get them soon.

 

[dustoff440]

I bought those for my 360 Magnum, I think you will be happy with them. Stock magnum springs are good to about 5300