/6 727 Driveline use??

[1968 Valiant]

My 68 valiant (4 door) turns out to have a 727 behind my slant six. I didn't even know they made 727s for a slant six. Aparently it's out of a van.
I am wondering if I can keep this driveline for my bb swap????? The 8 3/4 I am going to use has the small carier.

I assume I will have to have the yoke on the rear changed to fit the new rear end but will the front fit a bb727 and hold for the extra power?

 

[65 Dartman]

My 68 valiant (4 door) turns out to have a 727 behind my slant six. I didn't even know they made 727s for a slant six. Aparently it's out of a van.

Sounds like it might be out of a 71 or later slant-equipped van. If it was a pre-70 A100, it would have an adapter to mate the van small block 727 to the slant, plus the trans would have had a really short tail shaft. Trans mounting in those vans was from the top instead of the bottom.

 

[JR]

If it does have the adapter plate keep me in mind if you want to sell it. There will be an adapter for the crank also along with the bolts for both.