62-65 early model speedometer gear Chart?

-
highwaystar

highwaystar

Well-Known Member
Joined
Nov 6, 2009
Messages
1,252
Reaction score
188
Location
South East PA
I am looking all over for a chart on what our gears match up to, there are all kinds of charts for 66 and later models. Does anyone have a chart? I could not find anything in the archives. It may make a good sticky for the forum if anyone has one. I have a 3.55 gear and 26.5 tall tires. My speedometer is currently 20 m.p.h too fast.
any help is appreciated.
Highwaystar
 
In the 65 FSM there is a chart showing rear end gears and tire size. I would copy it but am at the Nationals right now
 
With apologies to the OP for a minor hijack along these same lines.

Has anyone used one of these to calculate gear tooth count?

It comes up to 41 tooth... Which based upon the follow-on charts is accurate as I've used navigation apps to track speed and compare to tach.

Seems off to me. What am I missing?

RPM and Tire size ratio calculation.jpg
 
WV64Signet said:
With apologies to the OP for a minor hijack along these same lines.

Has anyone used one of these to calculate gear tooth count?

It comes up to 41 tooth... Which based upon the follow-on charts is accurate as I've used navigation apps to track speed and compare to tach.

Seems off to me. What am I missing?

View attachment 1715981819
Click to expand...
Never seen a calculator that works for Early A's. If it has a 41 tooth, definitely not for our cars.

If you don't have a technical service manual for your year you should really have one. That's probably what's missing.
20220907_152515.jpg
20220907_152056.jpg
20220907_152205.jpg
20220907_152216.jpg
 
chewy said:
Never seen a calculator that works for Early A's. If it has a 41 tooth, definitely not for our cars.

If you don't have a technical service manual for your year you should really have one. That's probably what's missing.
View attachment 1715982329 View attachment 1715982330 View attachment 1715982331 View attachment 1715982332
Click to expand...

Thanks for the pictures... looks like maybe a 19 or 21 tooth . Just what I needed

Yes, have the TSM. NEVER far away :thumbsup:
But 64 only goes to show 3.31 or 3.55 axle ratio so trying to cipher an appropriate change to match things up with the 3.91 I have now.

T

16625899147155019487551883696854.jpg
 
The '65 chart above shows Grey and green for 391s. Next step higher would be Dark Blue 19 and then dark purple 18 for the 904.

Since I backed down to 3.23s and 225-60-14s I put the 18 back in. Then the pressure plate came apart, and it has sat there waiting for me to confirm it is right.
 
chewy said:
Never seen a calculator that works for Early A's. If it has a 41 tooth, definitely not for our cars.

If you don't have a technical service manual for your year you should really have one. That's probably what's missing.
View attachment 1715982329 View attachment 1715982330 View attachment 1715982331 View attachment 1715982332
Click to expand...

Interesting that the 64 TSM gives a shift pattern summary the Torqueflite with a 3.91 - 1 but doesn't show a 3.91 option in the pinion chart

16625905291675723093994520713375.jpg
 
You must log in or register to reply here.
-

Back
Top