[Found!] 63 dart right front hub

[vernk]

Got too comfy with my hammer trying to loosen the brake drum from the hub. Dented up the drum and looks like the hub pretty good. Possible the race is damaged as well so if you have a full knuckle pls let me know what you have.

This is for 10 inch brakes right front on my 1963 dart 270. Or any other compatible year or model....I don't know all that is compatible. Shipping would be to 19154 pa.

Thanks in advance!!
Vern

 

[whitepunkonnitro]

Vern, if that's the original brake setup on that car, they are 9 inch. 10s didn't show up until 65

 

[mycuda]

Have '64 set of 9" complete w/spindles or '65 set that are operational as is.
PM me for your interest.

Dave

 

[krazykuda]

I also have a set of 9" drums and spindles complete sitting around...

 

[vernk]

thanks everyone! so the Good Lord was smiling down on me. i cut off the brake drum and had to pry off the piece rusted against the hub. so...the hub is definitely bent. i wonder if i can bend it back. the race and spindle actually look good. but to my surprise, as i was digging through the pile of tools in the trunk i found a plastic bag w/ an extra hub!!! no studs but i can deal with that!

oh and i confirmed this is a 10"setup. the VIN matches a 63 so from what your all telling me the 10" is an upgrade? i was hoping you all were wrong as i thought i measured them right and already ordered 10" drums....thank goodness cause they fit perfect.

thx everyone
v