64 273 2 barrel carb, rebuild or replace

-

64mopar

Well-Known Member
Joined
Apr 14, 2019
Messages
474
Reaction score
634
Location
PittsBurgh
I have my 64 Barracuda up and running but not running very well the two barrel needs rebuilt or replaced anybody have any information for a rebuild kit or a replacement carb it is a Carter, I am having no luck finding a rebuild kit. At this time I would just like to rebuild or replace it I'm not looking to do a 4-barrel carb and manifold swap quite yet.

20190504_142925.jpg
 
FYI: I just watched a video yesterday where the carb rebuilder said that soaking the carb in carb cleaner and compressed air may not clean out the idle passages, thus many "failed" rebuilds. He suggested busting off one wire from a wire brush to use to "ramrod" clean out those tiny passages by hand.
 
Yes,that is trick I learned a long time ago,I use a piece of stainless wire.
 
I have quite a few 2 bbl carbs for sale if you need one...
 
I have seen them pretty cheap new on ebay. I know they are no name copies made in China but I have bought several Rochester ones for our race cars and they work great.
 
-
Back
Top