[SOLD] 64-66 Barracuda top of 1/4 panel moldings

[Lee Robinson]

I have a real nice pair of the moldings that go on the top of the 1/4
panels on 64-66 Barracudas. They are in excellent condition with no dents or scratches. $100.00 shipped from El Dorado Hills, Ca. PM me
if interested in these moldings. They are stainless for 64-65 Barracuda.

 

[cosgig]

Are these stainless or aluminum? There is a difference between 64-5 cars and 66's!! 64-5 have stainless upper trim and 66's are aluminum and have a different profile to meet the taillight. The stainless trim will work on a 66, but not without some modification to the open end where it slides over the taillight. Hope this helps, Geof

 

[68 CUDA FORMULA S]

P.M. sent

 

[Lee Robinson]

Thanks for the input. They are stainless. I wasn't aware that the
66 Barracuda had aluminum moldings.

 

[66FormulaS273]

As cosgig mentioned, 66 are a little wider and I believe a hair longer than 64-65

 

[Lee Robinson]

bump

 

[hondajoe007]

Hello ,how am going to get a hold of you ?

 

[Lee Robinson]

bump

 

[Lee Robinson]

bump

 

[Lee Robinson]

bump

 

[Lee Robinson]

bump

 

[Lee Robinson]

These are as nice as you'll find stainless moldings. bump

 

[tony lucckino]

LEE, I have a 66 b cuda and I would like to know exactly how wide and high your pair are. I understand that they are stainless and not aluminium as are the 66's. Please measure them up accurately as I want to be sure my fasteners will fit the narrower 4-5 mouldings.Measure inside width and out. Thank you tony in prescott,az:newb:

 

[Lee Robinson]

bump again

 

[Lee Robinson]

bump

 

[Lee Robinson]

These are nice and they are looking for a new home. bump

 

[Lee Robinson]

bump

 

[Lee Robinson]

bump

 

[Lee Robinson]

bump

 

[Lee Robinson]

I still have them and they are nice. bump

 

[Lee Robinson]

bump

 

[Osvaldo A.]

Hi Lee, Do you still have the moldings?