Contact seller
I have a good used '66 Barracuda dash wiring harness, as pictured. The harness is is good shape with only one frayed/cut wire- the yellow wire for the door jamb switch on the pass. side. There should be enough length left to cut and re-solder it, and still reach the switch.
I've given this harness a wipe down and look over. I don't see any wires missing and everthing appear to be there, including an additional sub harness with two purple wires, part number 2770460- rear speaker wiring, maybe?
The only other part numbers I found are 2770470 and 2661941. I think the first is the part number for the main harness.
Lots of pics to view HERE
$15.00 + USPS Priority Mail shipping w/Delivery Confirmation. PM or e-mail me, please.
Damaged door jamb switch wire has since had both frayed ends cut, so it's ready to be soldered:
I've given this harness a wipe down and look over. I don't see any wires missing and everthing appear to be there, including an additional sub harness with two purple wires, part number 2770460- rear speaker wiring, maybe?
The only other part numbers I found are 2770470 and 2661941. I think the first is the part number for the main harness.
Lots of pics to view HERE
$15.00 + USPS Priority Mail shipping w/Delivery Confirmation. PM or e-mail me, please.
Damaged door jamb switch wire has since had both frayed ends cut, so it's ready to be soldered: