[WANTED] 65 dart parts

-
Status
Not open for further replies.
Joined
Aug 4, 2015
Messages
7
Reaction score
0
Location
brookshire texas
Rating - 0%
0   0   0
Contact seller
REVISED LIST
65 Dart 2 door sedan


1.Windshield
2. Drivers side vent Window
3. Radio and bezal
4. Candy canes (front fenders around headlights)
5. Front fender body side molding .
6. Rear parking brake strut rods and springs.
7. Choke thermostat and linkage to carb.
8. 2 DEFROSTER VENTS
9. Gas cap
10. Door mirrors
11. Right rear 1/4 top molding ( runs on top of 1/4 panel up and around back glass.

thanks for the welcome and the help i really apprentice it
 
65 Dart 2 door looking for:

windshield - Windshields can be bought brand new
candy csnes - tough to find decent used - Layson's has reproductions
2- 15x7 steel wheels 4" pattern Put out a Want Ad in the Wheel/Tire/section; wheel companies will make them
fender body side molding you have a 2 door - 270 or 170 series?
slant 6 intake manifold choke thermo stat and linkagr to carb
(For a holley 1bbl) If you're looking for the rod linkage I have most of it maybe the choke kthermostat as well
Nice gas cap I can come up with a good used one, or buy a brand new one from SlantSixDan or a nice fabricated one from IIRC Damraider
2 rear 9" drum brake parking brake strut rods and springs. rear brakes someone has bound to have this stuff they don't need/want
radio and bezal again maybe a Want Ad in the Interior section

Hope all this helps and welcome to FABO. Lots of hardcore 65 Dart owners here!
 
2 rear 9" drum brake parking brake strut rods and springs. rear brakes

The rear parking brake strut spring is part # 80744 at NAPA and come 2 per box. One box needed to do both sides.

They're not too expensive and worth buying new vs used...
 
I may have the strut rods and springs for the rear 9" brakes!! I'll check tonight when I get home!
 
Right rear 1/4 top molding ( runs on top of 1/4 panel up and around back glass.


I HAVE THIS
 
Where are you located?
B]
REVISED LIST
65 Dart 2 door sedan


1.Windshield
2. Drivers side vent Window
3. Radio and bezal
4. Candy canes (front fenders around headlights)
5. Front fender body side molding .
6. Rear parking brake strut rods and springs.
7. Choke thermostat and linkage to carb.
8. 2 DEFROSTER VENTS
9. Gas cap
10. Door mirrors
11. Right rear 1/4 top molding ( runs on top of 1/4 panel up and around back glass.

thanks for the welcome and the help i really apprentice it
 
Ok guys looks like i got a handle on the parts and quite quickly i may ad.. i wantedvto says thanks for all the help.. ill be around and constantly looking for decent a abody...
thanks for all the help
 
Still looking fior 2 manual mirrors

also still looking for parking brake springs and arms and the clips that hold the front brake hoses to the frame
 
Status
Not open for further replies.
-
Back
Top