66 Ply Valiant

Status
Not open for further replies.

Mr Shine

At 12 dad said “Tear this 318 apart”.I was hooked.
Rating - 100%
2   0   0
Joined
Jan 23, 2008
Messages
210
Reaction score
41
Location
South Texas
Contact seller
416 Stroker, 4 speed, 3.23 Sure Grip (742). Chrome dash,steering column, seat backs. Runs STRONG..too much horespower for an "a" body.

I'll start at the top......Engine was built by Dick Bowsier of Dick's Performance in Urbana, Ohio ...937 653 4242
Holley 750 Vac Sec.
Edelbrock Intake (port matched)
Iron heads, ported, polished..the works
Roller rockers (crane?)
Comp Cams .647(?) lift
340 Block
Mopar Perf. 4.00 Stroker crank
Milodon high vol oil pump
Stock truck pan

Griffin 4 core radiator
single 14" elect fan

Centerforce clutch and pressure plate
833 4 speed (Brewer's)

Moser shortened 8.75
mini tub
tied frame
1/2 fuel line w/ Carter mech fuel pump

Centerline Sundance Dagger wheels 9.5" rear 7" front
Kumho tires

Magnum Force tubular front chassis
Master Power 4 wheel disc brakes (no parking brake)

Six Pak hood scoop

NEEDS: TLC...
paint touched up
shifter tweaked
gas tank filler tube
touque strap for engine
alignment

It just needs those finishing touches.

$18,000 OR partial trade for newer Chrysler, or Dodge car or truck. (something decent on gas, that is ready to go...please..no junkers that need work)
I will be listing it in the Mopar Collectors Guide soon...wanted to give the A-Body Forum folks first chance. I have pics posted in the forum..but will update those in the next day or so.
 

nemesis

Well-Known Member
Rating - 0%
0   0   0
Joined
Mar 12, 2009
Messages
856
Reaction score
1
Hmm,suprised your not finishing it up an selling it for more?

An you can never have " too much" power in an 'A' body ;)

get that right!
 

Valiant63

Early A-body Valiants
Rating - 100%
10   0   0
Joined
Dec 29, 2007
Messages
1,481
Reaction score
519
Location
eastern, PA and central Florida
You can have too much power if the car is tweeking apart if no cage or roll bars are properly installed. Lets see, over $10K for an unfinished car. Hmmm. Lemme think about it.
 

Mr Shine

At 12 dad said “Tear this 318 apart”.I was hooked.
Rating - 100%
2   0   0
Joined
Jan 23, 2008
Messages
210
Reaction score
41
Location
South Texas
Hmm,suprised your not finishing it up an selling it for more?

An you can never have " too much" power in an 'A' body ;)

get that right!
Cuz I ran broke..on more moolah to spend....over $33,000 in vested over the last 15 years...just trying to simplify my life and I need a good driver cuz my truck is gonna puke soon..205,000 on it
 

Mr Shine

At 12 dad said “Tear this 318 apart”.I was hooked.
Rating - 100%
2   0   0
Joined
Jan 23, 2008
Messages
210
Reaction score
41
Location
South Texas
You can have too much power if the car is tweeking apart if no cage or roll bars are properly installed. Lets see, over $10K for an unfinished car. Hmmm. Lemme think about it.
Its not coming aprt...just scares me..hard to hold on the road when I get into it...and no..I dont know what it will do in the quarter ..in case u or anyone else is wondering
 

cavemanmoron

Well-Known Member
Rating - 0%
0   0   0
Joined
Dec 12, 2005
Messages
1,738
Reaction score
9
Location
fn32
:worthles:


416 Stroker, 4 speed, 3.23 Sure Grip (742). Chrome dash,steering column, seat backs. Runs STRONG..too much horespower for an "a" body.

I'll start at the top......Engine was built by Dick Bowsier of Dick's Performance in Urbana, Ohio ...937 653 4242
Holley 750 Vac Sec.
Edelbrock Intake (port matched)
Iron heads, ported, polished..the works
Roller rockers (crane?)
Comp Cams .647(?) lift
340 Block
Mopar Perf. 4.00 Stroker crank
Milodon high vol oil pump
Stock truck pan

Griffin 4 core radiator
single 14" elect fan

Centerforce clutch and pressure plate
833 4 speed (Brewer's)

Moser shortened 8.75
mini tub
tied frame
1/2 fuel line w/ Carter mech fuel pump

Centerline Sundance Dagger wheels 9.5" rear 7" front
Kumho tires

Magnum Force tubular front chassis
Master Power 4 wheel disc brakes (no parking brake)

Six Pak hood scoop

NEEDS: TLC...
paint touched up
shifter tweaked
gas tank filler tube
touque strap for engine
alignment

It just needs those finishing touches.

$18,000 OR partial trade for newer Chrysler, or Dodge car or truck. (something decent on gas, that is ready to go...please..no junkers that need work)
I will be listing it in the Mopar Collectors Guide soon...wanted to give the A-Body Forum folks first chance. I have pics posted in the forum..but will update those in the next day or so.
 
Status
Not open for further replies.
Top