[WANTED] 67 barracuda bellhousing

-
Status
Not open for further replies.
O

oscar273

Member
Joined
Dec 12, 2011
Messages
8
Reaction score
1
Location
minnesota
Rating - 0%
0   0   0
Contact seller
Need a 67 9.5" cast bellhousing # 2806481, starter shield, pan, bellcrank stud, and throwout bearing lever, and pivot bracket. I have a 64-66 housing #2465523 but things don't line up. Already have 122 tooth flywheel and clutch.
Maybe my lever would work?
 
Spoke with Wayne at Brewers, they have some of the stuff I need, but was wondering if anyone had a complete set up used for sale.
 
If you got something let me know. I have a 66 bellhousing cast # 2465523, but the ball stud does not line up when installed in car.
Now I got the body done and everything ready to assemble, and no bell.
Thanks.
 
why not change over to t he 10.5 flywheel and aluminum bell??? A worthwhile upgrade, and the parts are common, and better supplied by aftermarket.
 
I have a bellhousing.throwout bearing lever,pan,pivot bracket for sure.I may have the z bar,starter shield and ball stud I will have to check.This is all from my 67 Formula S 273 car.I need 10.5 stuff for my 318.
 
I already bought a scalloped pressure plate that allows the use of a 10 inch disc in the 9.5 clutch, and have my flywheel machined.
If you have the parts I would be very interested, maybe pm me with prices.
Thanks, Mike.
 
Status
Not open for further replies.
-

Back
Top