67 Dart rear quater window roller

-
6

67DDDart

Member
Joined
Jan 18, 2011
Messages
7
Reaction score
0
Location
Taxachusetts
Do I replace this unit as an assembly or just replace the roller?
 

Attachments

  • roller.jpg
    91.5 KB · Views: 124
Might depend on how bad all the rollers are. That white one I believe is replaceable through RT Specialties, not so sure about the two that ride inside the metal part.
 
I took all mine and drilled out the rivets and cleaned them up and reriveted them and they work like a charm.
 
What's not shown in the photo above is the chunk missing from the roller on the other side. I didn't see any rollers that look like this one at RT Specialties (it has a ball on the end). Would I press off the roller and press on the new one?
 
I think that's what you're supposed to do. They have one roller that says it's a press on, and I was pretty sure it was that one since I ordered it by mistake. You could call them and double check.
 
You must log in or register to reply here.
-

Back
Top