[WANTED] 68-69 A-Body K-frame

[AintRich]

Need a k-frame for a-body near SE WI. 68-69 Big Block would be preferred but I can cut the mounts and weld into a slant6 or small block piece. I'm not worried about a resto piece, but just want it in good shape.

 

[vitamindart]

I have a later 73-up ( spool mount ) k member that someone started on the dc-k big block conversion on if you are interested.
in the Waukesha area

 

[AintRich]

I have a later 73-up ( spool mount ) k member that someone started on the dc-k big block conversion on if you are interested.
in the Waukesha area

Not quite what I was looking for, How much$$? I'm not that acquainted with the newer cars. Isn't the sway bar mount different?

 

[vitamindart]

sway bar mount is different, there is a write up on bigblockdart.com on how to do the conversion. if you are in the Waukesha area we could meet up and you can make an offer.

 

[barracudakid]

i have a 68 69 big block k frame,motor mounts and torsion bars

 

[marksmopar1]

Not quite what I was looking for, How much$$? I'm not that acquainted with the newer cars. Isn't the sway bar mount different?

FYI...You can mount either style of sway bar on the DC spool mount K member. It all depends on the lower control arms your using. I have original K frames and DC frame. The spool mount has the advantage of not having rubber mount let go....no real torque strap required. The spool mounts a B body big block mounts.