Can someone give me some measurements for where the fender pentastar is mounted on the passenger fender? My paint and body guy filled the holes in. (Non-Mopar guy, but still...:banghead It's a '68 Formula-S. Thanks in advance.
From the horizontal crease in the fender, go 2 1/4" - 2 3/8" down.
Then go 6 1/2" from the back edge of the fender forward, or 4 1/8 from front of fender back. (Note the measurement from the rear is more accurate because of the wheel well trim in the way is close estimate from front edge back.)
Or 5 1/8" up from the bottom edge of the fender.
This was measured off a 68 Formula S Fastback with ORIGINAL PAINT...