[SOLD] 68 cuda notch part offering before scrapyard

[drive48]

whats left of a 68 notch that had a hard life 6cyl and driveline still in car

there are some usable patch panels still

• roof great shape
• rear glass good
• quarters mid wheel up
• inner / outer wheel wells
• trunk drops not rotted out just bottom bend near qtr lip gone
• upper cowl still complete
• front drums setup
• rad support parts
• inner fender pass good for patching
• i have several doors parts and solid cores

some vinyl trim

front windshield has small rock nick

1. frames shot
2. floors shot
3. fenders junk

located in CT make offers on what you need i'll cut and ship if necessary
otherwise its gonna meet CHINA soon.

pm me needs or questions
thx joe

 

[70DartMike]

Bump. C'mon guys, grab this stuff.

How's the drivers window regulator? Also the drivers inner fender?

 

[daredevil]

better pics of the trunk corners bottom of the window, hinge area please.

 

[waggin]

need drivers side metal upper door panel??? it's just above the door panel and metal....

 

[drive48]

better pics of the trunk corners bottom of the window, hinge area please.

will get better pics tomorrow. the gutter area and/or the dutchman panel area and where qtr meets the deck filler panel

need drivers side metal upper door panel??? it's just above the door panel and metal....

if you are talking inside the door above the vinyl panel yes i have several doors that are good there i can cut off for you. pm sent about specific cut area.

 

[waggin]

for the rear passenger area just below the side glass and above the rear door panel

will get better pics tomorrow. the gutter area and/or the dutchman panel area and where qtr meets the deck filler panel

if you are talking inside the door above the vinyl panel yes i have several doors that are good there i can cut off for you. pm sent about specific cut area.

 

[roughidle]

PM Sent

 

[68 bee]

Pictures of the cowl and drivers side A-pillar, passenger inner fender. Any rust holes on the parts

 

[38 Dodge]

can i get pictures of the entire trunk pan as well as the extensions

 

[drive48]

PM Sent

replied and will get ya those pics

Pictures of the cowl and drivers side A-pillar, passenger inner fender. Any rust holes on the parts

pm me email ill send pic file

can i get pictures of the entire trunk pan as well as the extensions

pm me email il send pic file

joe

 

[drive48]

ok so the rain stopped and i got out there cutting off what is still usable
for those waiting for specific pics you'll get em tomorrow.
if anyone sees anything in pic of engine or tranny let me know
ill cut remove and ship anything.
Not looking to make a fortune... just offer fair $ to cover my time cutting parts off and shipping. otherwise parts hitting the scrapyard
joe

good usable parts: or some for patch panels
perfect roof
deck filler panel with trunk hinge hardware
trunk drops tops solid sides so-so
wheel wells good for most part and patching
rear side gutters and tail light mount section
upper cowl/glass-frame and some of firewall
door jams for patching
package tray steel
wing windows and hardware
door glass and hardware cranks
green door panels and pulls
door hinges
rear floor patches
shock crossmember and bolts
7.25 rear and slant 6 driveshaft

• On a side note i have tons of a body steel in the barn sorry no cuda fenders.

 

[roughidle]

I guess you did some cutting over the weekend!

 

[drive48]

more pics

 

[drive48]

more interior

 

[wcallon]

do u have the linkage from steering wheel to the tranny for the column shifter

 

[roadripper]

How much to ship roof and Dutchman panel and doors if still available
How much to ship to dunseith nd 58329
Thanks mike

 

[roughidle]

Here's a note on OLD THREADS....try PM'ing the original poster before dragging old posts that are THREE YEARS OLD out of the closet....just a thought....

 

[roadripper]

Wow never even looked at that , lol

 

[67venomcuda]

Still have the roof?... oops didn't see the date stamp sorry