69 10 inch drum dust cap

[three_deer]

I ordered Dorman's 618-100, 13976 dust cap for my 69 Barracuda 318 with 10 inch front drum brakes but they are too small. My inside diameter is closer to 1 3/4. Does anyone know the correct part number? The shop manual I have give no helpful info on this.

Thanks !

 

[WhodatReggie]

Oddly enough I have the same problem. My hub is 1 3/4" i.d. also. Cannot find a dust cap either! I have a old NAPA parts book and it indicates the number to be 730-2436. It is listed for Barracuda 66-72 excluding 9" drum. I have not called NAPA as of this post. Good Luck!

 

[three_deer]

Many Thanks !! That looks like what I needed !!

 

[WhodatReggie]

I found the dust caps at O'Reilly!....I bought a chrome set by Mr.Gasket number 2485 for $6.99 for the pair. Top quality! But I had to freeze the caps in the freezer to install them. Great fit....Check them out. WhodatReggie............

 

[WhodatReggie]

I stand corrected $6.99 each...Sorry my bad............Still excellent quality........

 

[WhodatReggie]

Damn....right the first time....O'Reillys give me a credit on another invoice for one set, I did not need 4 dust caps (2 sets). I was there three times and four receipts later. A newby waited on me. So I got wrong parts first time in the store . Their invoices are quite small and confusing......Bottom line 2 chrome dust covers were $6.99!

 

[chryslerfat]

Glad you found some.