69 4 speed hump measurement

-
Steven190

Steven190

Well-Known Member
Joined
Jan 13, 2012
Messages
1,250
Reaction score
655
Location
Omaha
Does anyone have a good reference measurement to install a 4 speed hump into a 1969 Dart?

The car I have now is an automatic and I have a AMD hump. Just looking for a distance to put the hole at. I do nor have the engine and 4 speed to install to reference the hump. I want to send the car to the body shop to start work on it.

Sorry I do not have the time to d a search at this point.

thanks for any help or ideas
 
Bad Sport said:
I found this in thirty seconds. Also read the last post in the thread, it makes perfect sense to me.

http://www.forabodiesonly.com/mopar/showthread.php?t=166930&highlight=location+speed+hump
Click to expand...

That's exactly what i did with my car, (the last post in that thread) and it worked perfectly.
One thing i should say is to watch when you are removing the floor piece at the transmission cross member and be careful not to cut into the cross member.
In my build thread i have some pics on how i did it too, but the above link is just as good.
 
Thanks for the replies

I work too much at this time to devote to looking for things. I appreciate the help.

THANKS
 
You must log in or register to reply here.
-

Back
Top