[WANTED] 69 Barracuda Right/Pass Side Fender Fish Emblem

[Shakedownscott]

Looking for a '69 fish emblem p/n 2963 656 for the right fender. Driver quality, it doesn't have to be perfect.

right -passenger- fender fish by shakedownscott, on Flickr

 

[Mike69barracuda]

I might have a few.

 

[69FBCuda]

Looking for a '69 fish emblem p/n 2963 656 for the right fender. Driver quality, it doesn't have to be perfect.

View attachment 1715537511right -passenger- fender fish by shakedownscott, on Flickr

Don't go by the part number as it is the same across multiple years. Pin location is critical unless you want to re drill the fender. The trunk fish have 1 long thin pin and 1 short stubby pin, for 69 the tail pin is closer to the center

 

[Shakedownscott]

Don't go by the part number as it is the same across multiple years. Pin location is critical unless you want to re drill the fender. The trunk fish have 1 long thin pin and 1 short stubby pin, for 69 the tail pin is closer to the center

Thank you for the information, never would have figured that.

From what I've read the '69 fender fish is a one year only; and in'67-'68 the fish was bigger?

 

[Shakedownscott]

I might have a few.

That would be awesome if you do. I'm pretty sure its the last piece of trim I need to make mt project complete. Although I'm along way from getting her on the road.

 

[Shakedownscott]

The fish that I am looking for is about 3-5/8" long, with 1-1/2" pin spacing. Pretty sure that is the correct one for a '69. The car I have came with no fish or holes for them, was re-badged as an "S" by the PO.

 

[Mike69barracuda]

Roger that!. I'll look in my stash for you this week. Here is my 69 almost done. We are doing assembly this week. New AMD qtrs.

 

[69FBCuda]

The fish that I am looking for is about 3-5/8" long, with 1-1/2" pin spacing. Pretty sure that is the correct one for a '69. The car I have came with no fish or holes for them, was re-badged as an "S" by the PO.

Feel up behind the fender where the fish goes most likely you will feel the filler. If the fender is a correct 69 you should be able to reclaim the holes. Your dimensions are correct.

 

[Shakedownscott]

Roger that!. I'll look in my stash for you this week. Here is my 69 almost done. We are doing assembly this week. New AMD qtrs.

Thanks for looking Mike, I appreciate it.

Your ride is looking great. Love the color,it goes really well with the white top. Are you going to add the stripes back?

 

[Shakedownscott]

Feel up behind the fender where the fish goes most likely you will feel the filler. If the fender is a correct 69 you should be able to reclaim the holes. Your dimensions are correct.

Thanks, I will give that a shot. If I remember right, I think one is a '68. They both have the side marker lights filled in.

 

[69FBCuda]

Thanks, I will give that a shot. If I remember right, I think one is a '68. They both have the side marker lights filled in.

On a 68 fender the hole closest to the fishes mouth will be correct.

 

[grjammer]

I have a pair of fishes, pn 2785321 pins are 2.75 on center, pn 2785320 pins are 2.5 on center. Both are 4.5 in. long PM if interested. not perfect

 

[Shakedownscott]

I have a pair of fishes, pn 2785321 pins are 2.75 on center, pn 2785320 pins are 2.5 on center. Both are 4.5 in. long PM if interested. not perfect

Thanks for the offer but those are a little larger than the ones Im looking for. I think the ones you have fit '67-'68 barracuda.

 

[d55dave]

I have one. PM me if you are interested.

 

[Derrick Kidwell]

I have one finish is nice but will have to attach with double sided tape 3m both posts are gone,or epoxy on post from pitted fish $20 plus the ride

 

[Shakedownscott]

I have one. PM me if you are interested.

Thanks Dave, PM sent.