7 1/4 width?

-

2manymopars

AKA mopar_daddy
Joined
Aug 14, 2011
Messages
1,378
Reaction score
104
Location
California, 91762
Does any one know off the top of their head the width of a 65 7 1/4 wms to wms? IIRC they are slightly wider than a 8 3/4 which is 57 1/4.
Thanks
 
Why are you having customs axles made for a 7 1/4 rear. If just to get the large bolt pattern, I think it would be cheaper to swap the complete rear axle assembly for a later LBP rear, either later 7 1/4 or 8 1/4.(cannot just swap axels). I have run the 7 1/4 rear for years in my race cars, but can't see spending the money for custom axles.
PS: I have a 3.91 SG, a 4.56 SG, and a 5.13 SG, 7 1/4 rears.
 
What is the length of each axle and what is the number of splines for a stock 7 1/4 rear end. Strange is asking this information that are going to build me a set of axles with a 5x4.5 bolt pattern. But they want this info. Any help would be appreciated.

I bet if you post a wanted ad for a 7 1/4 big bolt rear end you would get some offers that are very reasonable. If you weren't so far away I have one that I would take $75.00 for.
 
What is the length of each axle and what is the number of splines for a stock 7 1/4 rear end. Strange is asking this information that are going to build me a set of axles with a 5x4.5 bolt pattern. But they want this info. Any help would be appreciated.

Overall length from drum mounting flange to end of axle is 29 inches.
From outside of axle bearing to end of axle is 26 1/4 inches.
25 splines at approx 1.080-1.090 dia.
Length of splines approx 1.850
 
-
Back
Top