This weekend I picked up a set of 5 x4" bp Cragar SS's from another member. Now I need to know where I can get 7/16 left hand shanked lugnuts for these. I really don't want to change the studs because they will not be on the car long, and I may want to put them on another down the road.
7/16 x 20 Left Hand thread Lugnuts
- Thread starter B-onefan
- Start date
-
grumpuscreature
Resident Curmudgeon
Oklacarcollecto
Life is an experiment
Here is where you can buy a set of lug nuts for the Cragar wheels. You might see if they will just sell you 10 lefts.
[ame="http://www.ebay.com/itm/Cragar-Lug-Nuts-Washers-for-5x4-Bolt-Pattern-10-Left-Hand-10-Right-Hand-/130836229130?pt=Motors_Car_Truck_Parts_Accessories&hash=item1e76726c0a&vxp=mtr"]Cragar Lug Nuts Washers for 5x4 Bolt Pattern 10 Left Hand 10 Right Hand | eBay[/ame]
[ame="http://www.ebay.com/itm/Cragar-Lug-Nuts-Washers-for-5x4-Bolt-Pattern-10-Left-Hand-10-Right-Hand-/130836229130?pt=Motors_Car_Truck_Parts_Accessories&hash=item1e76726c0a&vxp=mtr"]Cragar Lug Nuts Washers for 5x4 Bolt Pattern 10 Left Hand 10 Right Hand | eBay[/ame]
Thanks!!! I looked thru Jegs and didn't see any. I guess I should have also looked at Summit, but it never crossed my mind.
Oklacarcollecto
Life is an experiment
Jegs has them also and I am showing that they have free shipping and handling.
http://www.jegs.com/i/Cragar/260/09004-4/10002/-1
BillGrissom
Well-Known Member
I bought them on ebay. Chrysler wasn't the only manufacturer that used LH threads, nor 7/16"D. As I recall, Cragars require a slightly thinner shank on the "mag nuts", so insure they state for Cragar. Mustangs used Cragars also, but different bolt pattern.
-
