Newbomb Turk
Well-Known Member
Everyone is HOPING to see you in a dress. Even my wife wants to see it.
70 dart 470 ci drag car build.
- Thread starter MOPARMAGA
- Start date
-
Everyone is HOPING to see you in a dress. Even my wife wants to see it.
Well everyone might just have to be disappointed
Since I'm not making Bill wear a dress if I win, it will be going on you faster than you can draw that pistol lol
Newbomb Turk
Well-Known Member
IDK…I’ve got a pretty quick draw and a serious aversion to wearing women’s clothes. Unless the wife wants me to (she never does).
TT5.9mag
Two atmospheres are better than one
Might?
Yeah "might" because I don't know if I'll win or lose, not "might" wear a dress.
if you've noticed, I have never once said "I'm going to win" nor did I make this ridiculous bet lol... that comes from the brilliant mind of newbomb Turk (newborn turd).
Now my wife just pissed me off saying I need to dress up and go to a rotary event with her next Saturday (screw that **** too)
Newbomb Turk
Well-Known Member
lol you will be at the event. It is what it is. Might as well resign yourself to going. The not going option is a bad one.
Same reason I wasted a Sunday going to Idaho. It came with “I do”. Except not for them.
Yeah I'll be going with her but she won't be chiming in on what I'll be wearing like she always does and never gets her way
Is it snowing at your house too ?
Newbomb Turk
Well-Known Member
Not yet. Raining though. I want ZERO snow this time of year.
Yeah I just left the snow, down to the rain
Nothing real big to share, just more mock up stuff. Today I bolted my rear wheels in. Also mounted the k-member. Pulled out the box for my new brakes and steering linkage stuff.
I guess I didn't order some stuff correctly and will just sell it or figure something out.
I had to press new bushings in my uca's and new bushings in the lca's.
The k-member needed to be notched a couple times to fit around my external oiling line.
Hopefully I can get the front brakes on and the front wheels, I also need to put my fenders on to check for clearance, I am running a 28 inch tall tire up front. Rear tire dimensions are 30.6 tall 13.25 tread and 15.50 section width on 12 inch wide weld draglites.
Hoosier calls the tire a 29.5 11.5 w 15 & stuff sidewall.
I guess I didn't order some stuff correctly and will just sell it or figure something out.
I had to press new bushings in my uca's and new bushings in the lca's.
The k-member needed to be notched a couple times to fit around my external oiling line.
Hopefully I can get the front brakes on and the front wheels, I also need to put my fenders on to check for clearance, I am running a 28 inch tall tire up front. Rear tire dimensions are 30.6 tall 13.25 tread and 15.50 section width on 12 inch wide weld draglites.
Hoosier calls the tire a 29.5 11.5 w 15 & stuff sidewall.
Last edited:
You came here without asking first. lol Why were you here?
I don't see a dress in your future, I see boosted going to W headed small block or big block after the loss. 
Newbomb Turk
Well-Known Member
Business for the wife. Didn’t want her going that far alone.
Or your wife didn't want to go that far with you alone is more like it.
I mocked up the front suspension, new front brakes, put the front tires on and checked fender clearance for big tire up front. Needs a trimming in the front of the opening.
The garage is such a mess I don't know if you can see the work I did lol
The garage is such a mess I don't know if you can see the work I did lol
So the car made it too the garage floor today.
I final assembled the rest of the Dana & added new axle studs.
Test fitting the assassin bars.
Need to move my sliders back an inch.
Oil pan is an inch off of the ground so I need to raise the car up a few inches but I'm extremely excited now.
I final assembled the rest of the Dana & added new axle studs.
Test fitting the assassin bars.
Need to move my sliders back an inch.
Oil pan is an inch off of the ground so I need to raise the car up a few inches but I'm extremely excited now.
Hell yeah! Starting to see the light at the end of the tunnel!
I raised the car up about 5 inches after dinner.
Figured since I wanted to know I'd stick the scales under it. So far it's a 51% front and 48.8 % rear bias total 2245.
I figure there's another 100 pounds to pull out of the car and putting lighter weight stuff back in.
That should help because I have maybe 100 pounds of metal to put in for floor pans and framing .
I am hoping to be at the most 3100ish race ready and me 175 in the seat.
Figured since I wanted to know I'd stick the scales under it. So far it's a 51% front and 48.8 % rear bias total 2245.
I figure there's another 100 pounds to pull out of the car and putting lighter weight stuff back in.
That should help because I have maybe 100 pounds of metal to put in for floor pans and framing .
I am hoping to be at the most 3100ish race ready and me 175 in the seat.
-
