[WANTED] 70 duster ecs fuel neck tube

-
Status
Not open for further replies.
So you need the filler neck tube that goes from the quarter panel to the gas tank. The one with the vent nipple at the top of the tube by the quarter panel?

I think these are reproduced. Check with Van's or Mega Parts.
 
i have this 1. 35.00 plus shipping.

20250919_094732.jpg


20250919_094735.jpg
 

i think this came off a 70 because it butts up against the inside of the quarter panel from the trunk. my 71 tube goes into the tank from the outside of the quarter panel.
 
Frankly I'd go the opposite way. Get a NON ECS tube and get rid of the EVAP stuff. So far as I know, 70 was a split/ changeover year, or maybe CA only EVAP, 49 states were vented
 
70 and 71 Duster and 71 Demon the flange is on the inside or the quarter. 70 usually has the nipple for the small vent tube. But some california cars in 70 had the ecs style like 71 with no nipple. All duster Demon had three screws for attachment, Darts and Scamps had 4 screws and cannot be used due to the quarter panel being flatter on that body style it warps the quarter. Also the caps for 67-70 and 71 do not interchange. 67-70 caps do.

I recently put 72-76 quarters on a 71 Demon. I come to find out I needed to use the 72 -76 fill tube because the indent for the tube was deeper
 
Last edited:
Status
Not open for further replies.
-
Back
Top Bottom