70 small block crank pulley

[bnichols]

looking for a small block crank pulley and bracketry for the ac idler to switch from power steering to manual steering anyone?? brett

 

[Moparparts]

I have a lot of pulleys available PM sent

 

[4spdragtop]

I have extras as well if abv deal falls thru

 

[Oldmanmopar]

This is a 70 that was manual steering and has been changed to Power steering. The bracket was left hanging on the car where it was. but is not being used. I believe this is what he is looking for. Steve

 

[winstoninwisc]

i have a 4 belt pulley if it works or some 1 else can use it 50 deliverd in lower 48

 

[Oldmanmopar]

It takes a three grove crank pully. It is the same for power and manual Steering. The idler you see hanging on the motor that is not being used takes the place of the power steering when manual steering is being used. This is the only thing you need to tighten the belt when you don't have a pump. All the rest of the pullys are the same.

 

[Moparparts]

Here you go. PM me.

 

[bnichols]

This is a 70 that was manual steering and has been changed to Power steering. The bracket was left hanging on the car where it was. but is not being used. I believe this is what he is looking for. Steve

ok that is the bracket and pulley i need anyone have one?? don the pics you posted looks like all but that one i need??

 

[Oldmanmopar]

It would be the one on the bottom in the center. Grab it they are very rare.

 

[Oldmanmopar]

If you don't I will.

 

[bnichols]

pm sent thanks