71 Duster fender turn marker placement

-
A

Avispa

Well-Known Member
Joined
Feb 26, 2007
Messages
1,867
Reaction score
1,704
Location
Georgia
I have a nice pair of top ender turn signals layimg around and decided to put them on a 71 Duster I have. Can someone give me the placement demensions for these ?

TIA
Roger
 
Wish I could help you. I posted the same question a couple of months ago. I had two people PM me that they would get the measurement from their car. I have not heard back from them. I am still trying to find out. Thankfully the bodyshop is not to that point just yet.
 
on a 71 Dart they are 1 1/4 from fender ext to front of indicator
and 1 1/4 from inner fender lip to center of indicator.
this is for factory indicators that attach from bottom no screw thru top
 
Uh, 71 Duster, guess I wasn't paying attention, but thaks anyway, it'll help the original poster withthe Dart
 
Actually I am working on a Duster. So I will be waiting to see if someone could please measure their Duster....
 
Ok here is what I came up with. It is 8 5/8 inches fromthe front edge of the fender to the center of the large hole and 1 1/2 from the inner edge of the fender to the cener of the large hole. The large hole is 7/16 of an inch. My measurements start at the edge of the tape on the left. Hope this helps.

Booger and Fender signal 004.jpg
 
You must log in or register to reply here.
-

Back
Top