[Found!] 7260 slip yoke

[duster360]

Looking for a 29-30 slip yoke for 727 or A833 trans. Length is 8" from center of ujoint hole to end of slip part.

 

[physixx]

I have one from a 727 but it measures just over 9 1/2" total length.

Ken
Edison, NJ

 

[duster360]

I wonder why some of them are different lengths? I will have to check on that and get back to you.

 

[physixx]

Not sure either but the splines are deep inside the part that goes into the trans so it can be cut to the length that you need.

 

[duster360]

How did you measure it? Total length from end to end or from center of ujoint hole to end of slip part?

 

[physixx]

Total length from end to end. 9" to the center of the U-joint.

 

[duster360]

How deep from the end to the splines?

 

[physixx]

3"

 

[duster360]

That one may not work. Mine are 1 1/2" deep. If I cut the one you have down, that would put the splines on your 2" deep. Will have to pass, thanks for offering.

 

[physixx]

I understand. Good luck with the hunt.

 

[duster360]

STILL LOOKING

 

[j061093409]

8”
1 1/2 in for threads

 

[duster360]

8”
1 1/2 in for threads

View attachment 1715305434

View attachment 1715305436

View attachment 1715305437

PM sent

 

[70Roadkill]

Not sure if your still looking or not but I have this one.

 

[duster360]

Decided to get a new one. Thanks to everyone who offered.