727 SB shift linkage

[mikeyb0013]

Anyone have the shift linkage and cross member shaft for a 727? I converted my 904 to a 727 and although it works I'd like to be able to drop it into 2 and L!!

Thanks

 

[72Swinger340]

Anyone have the shift linkage and cross member shaft for a 727? I converted my 904 to a 727 and although it works I'd like to be able to drop it into 2 and L!!

Thanks

Column or console shift, if column, Can you show me pictures and lengths, I might have what you are looking for.

 

[j061093409]

I am in CT USA

I have a setup

[email protected]

 

[cudacrazy67]

Pm moparparts on here. He has alot of linkage.

 

[mikeyb0013]

Column or console shift, if column, Can you show me pictures and lengths, I might have what you are looking for.

It's column shift but I don't have any pictures or dimensions. I only have my stock 904 setup.

Thanks

Mike

 

[mikeyb0013]

I am in CT USA

I have a setup

[email protected]

Thanks I emailed you

 

[mikeyb0013]

Pm moparparts on here. He has alot of linkage.

Thanks for the lead!!

Take care

Mike

 

[cudacrazy67]

Moparparts on here spends the time to make sure you buy the right stuff the first time. If your not sure what you need pm him and he will able to hook you up.

 

[ir3333]

..to make the 904 cross shaft work properly cut out 1 inch and re-weld (make sure you index it)
this is necessary because the 727 is a little wider.
and you may have to mount the trans bracket under the tab instead of above to get the shaft level

 

[dusterdragracer]

Look at Summit, they make a cool kit from ididit, that is some brackets and a cable.If I had known about it, I would have done it, but I went the stock way, and it costs me more in the long run.
They also make a cable kick down linkage kit.