Contact seller
For sale I have two sets of 73-76 A-body or FMJ body dust shields. They were pulled from an A or FMJ car, but these should fit any of the 73+ A/B/E/F/M/J and R body knuckles for the 10.95" rotors. Both are galvanized steel.
First set I cleaned up with evaporust, but one had a crack that I welded up and smoothed down a bit with a grinder. It should work as is, but you could definitely do some more finish work on the weld if you wanted it to look nice.
Second set is Sold!!! First set still available.
Asking $25 shipped by USPS flat rate padded envelope. Neither set is perfect, both sets should function OK. If a USPS flat rate box won't work because of your location (ie, outside the US), contact me for a shipping quote. Shipping will be from Sacramento, CA.
First set I cleaned up with evaporust, but one had a crack that I welded up and smoothed down a bit with a grinder. It should work as is, but you could definitely do some more finish work on the weld if you wanted it to look nice.
Second set is Sold!!! First set still available.
Asking $25 shipped by USPS flat rate padded envelope. Neither set is perfect, both sets should function OK. If a USPS flat rate box won't work because of your location (ie, outside the US), contact me for a shipping quote. Shipping will be from Sacramento, CA.
Last edited: