'73 Dart Sport Part Out

[Rumblin_440]

View attachment IMAG0221.jpg
Front Bumper Brackets

View attachment IMAG0222.jpg
Right Front Lower Control Arm

View attachment IMAG0223.jpg
Brake Booster Bracket

 

[SRT_DSTRHOLC]

Do you have a driver side sail panel?

 

[Rumblin_440]

Sail panel as in plastic around quarter glass or rear panel below glass by seat? I'm still kinda learning the part names haha.

 

[SRT_DSTRHOLC]

Sail panel as in plastic around quarter glass or rear panel below glass by seat? I'm still kinda learning the part names haha.

around 1/4 glass yes

 

[Rumblin_440]

Ok I'll have to look in my parts car bc the one that I already have removed is split in two.

 

[Dodge74]

So there is 4 pieces that hold up the front bumper and two to the fenders correct ???
Is there something else inside the bumper that the brackets connect to or do they just go right in to the bumper???

THANKS FOR YOU'R TIME............................... PETE ...............................................

 

[Rumblin_440]

The two big pieces go from the frame straight to the bumper and the little ones go from them to the fenders

 

[mopardrt]

is the car a non a/c car? if so I need the crankshaft pulley

 

[Dodge74]

I thought it took 4 pieces to hold the bumper up and two to the fenders???

 

[Rumblin_440]

Sorry mopardrt but it was an AC car. Dodge74 there is 4 pieces there in the pic the big ones are really all that support the bumper tho.

 

[74DartSwinger360]

@ small braces that bolt to the bottom of fender are what I believe he is talkin bout.

 

[Dodge74]

Hi, I see the outer brackets that go from the chassis to the bumper and the brackets that go from the outer bracket to the fender. The one's I don't see and am wondering if you have are the inner brackets. Those are the brackets that are go alongside the outer brackets and are bolted together at the chassis (They kind of form a "Y" at the bumper). This would be a total of six pieces. Sorry for the misunderstanding. Hopefully this clarifies my question. Thanks for your help.


PETE

 

[Rumblin_440]

Ok gotcha ya they are still connected to the bumper I can get those off and pics for you tomorrow.

 

[Musick73dart]

i am looking for a set of bucket seats

 

[johnparts]

Back Glass intacted? how about the metal around it?

 

[Rumblin_440]

Sorry the front buckets were takin out before I got it. The back glass is intact I'll have to check on the trim tho

 

[Dodge74]

Cool!!! Will be waiting for the picks...........................

THANKS.................. PETE..................................

 

[johnparts]

Sorry the front buckets were takin out before I got it. The back glass is intact I'll have to check on the trim tho

Not concerned with the trim I was looking for the sheet metal around the window

 

[Rumblin_440]

Ok well thats a good question I'll take a few pics for you.

 

[johnparts]

Ok well thats a good question I'll take a few pics for you.

Cool I would need about 2" around the whole window if its still solid. (You don't want to know what my crazy *** is gonna do with it.)

 

[Rumblin_440]

Ok now you can't say something like that without knowing you're gonna raise a lot of questions lol.

 

[johnparts]

Ok now you can't say something like that without knowing you're gonna raise a lot of questions lol.

Think Charger 500

 

[Rumblin_440]

Oh very nice well then I hope we can make a deal I would like to help out that project.

 

[Rumblin_440]

Here are those brackets.

View attachment Front Bumper Brackets2.jpg

 

[Rumblin_440]

Here is the rear window I took a pic of the worst spot around it so you can use your judgement.

View attachment Rear Window.jpg

View attachment Rear Window2.jpg