73 front disc brakes

[dart 340]

I have a 70 dart with a stock small block K frame and 73 swing arm and disc brakes. I am installing a Hellwig front sway bar and the brake calipers are hitting on both sides. Can the calipers be switched to the backside or would I need to switch to different brake set up?

 

[shainphelps]

i have mine facing the rear thats the way the kesey hays were mounted

 

[sparkie573]

Do you have any pictures of this as I may end up having the same problem shortly. I have a 71 scamp with 73 duster spindles and calipers on it that are mounted in the front. were you able to turn them around somehow?

 

[Jim Lusk]

You can swap spindles and calipers OR shorten the end links.

 

[grumpuscreature]

All you have to do is swap everything from side to side. Pop the ball joints and tie rod ends loose and move the left side to the right and the right side to the left.

 

[sparkie573]

Ah sounds good. I haven't looked at moving them yet. I just know they are mounted in front. thanks

 

[Jim Lusk]

Like I said you can also shorten the end links. This is easier and does not hurt bar performance.