74 duster ,solid shell tint glass,,$650.oo,in n.w. penn

[joel]

74 duster ,solid shell tint glass,,$650.oo,in n.w. penn

74 duster ,solid shell tint glass, ,$650.oo,in n.w. penn
save your rusty car or make a good race car/project
-solid frame rails
-solid structure, floor pans have been replaced,
-inner wheel houses have been cut out for tubs,
-inner fenders have been removed
-solid qtrs some rot in lowers
needs rockers replaced,
-perfect rear framerails,
perfect doors
perfect trunklid
fair /poor fenders
tint glass


-needs trunkspare tire section,
-no title
no int.
650.oo
located in n.w. penn

can load on trailer
personal message me

 

[rumblefish360]

Is there any floor to it at all?

 

[joel]

the floor was all patched front and rear , ill try to post some more pics

 

[rumblefish360]

This sounds like a shell ripe for a cage.

 

[joel]

would make a perfect race car, = no title ,

 

[john27pa]

Would really like to have the rear pass side quarter from the wheel well-about 1/2 the wheel well- back and around to just left of the right turn signal. Cut straight up from almost center of weel well and straight down the center of the tail panel section.
My tail light section on pass side is all screwed up from prev owner. Looks like someone clip the back corner and they used a screw style dent puller and putty. So I dont really need all that metal- just good to have alot to work with so you know everything gets aligned right. Plus my lower quarter can use a patch.
If you still have that avail next month- I would grab it. You know how xmas is lol. I wouldnt mind one of those Challengers if you still have one that still buildable? I live about 45 min north of DuBois.
Also- have any 15" BBH ralley wheels? I need 2-3. And some chrome trim rings for them.

 

[joel]

i can cut the car , let me know if you want to come up and take a look

 

[joel]

everything is under 2 feet of snow right now , will be hard to do any work on the car but could still load on a trailer