sliffner
Active Member
Contact seller
Car is in Tehachapi Ca
1974 swinger
-Very snappy 318
Hedman headers
4bbl carter
Edelbrock rpm airgap intake
New fuel pump
M/t valve covers
Purple cam- unsure of size but has a very nice lope
-freshly rebuilt sb 727 with zero miles
Trans go stage 2shift kit
Brand new 2400 stall converter
* needs new driveline or the one I have shortened as this trans is 4" longer than the 904
-new front end kit from performanceonline.com
Just needs new pitman arm
I have new lca bushings that haven't been out in yet
Extra set if strut rods
Need to set ride height and torque everything down
BODY IS STRAIGHT BUT FOUND A RUSTED AREA WHERE ROOF MEETS WINDSHIELD
** took wheels off and found that the previous owner had 5x4 wheels machined to 5x4.5 so the lug holes are oblong, not too happy about that so I was gonna replace them.
Please let me know if you need more pics or info- I know I'm forgetting stuff so I will update the thread as I remember.
Body is very very straight.
I'm asking $2750, need it gone
1974 swinger
-Very snappy 318
Hedman headers
4bbl carter
Edelbrock rpm airgap intake
New fuel pump
M/t valve covers
Purple cam- unsure of size but has a very nice lope
-freshly rebuilt sb 727 with zero miles
Trans go stage 2shift kit
Brand new 2400 stall converter
* needs new driveline or the one I have shortened as this trans is 4" longer than the 904
-new front end kit from performanceonline.com
Just needs new pitman arm
I have new lca bushings that haven't been out in yet
Extra set if strut rods
Need to set ride height and torque everything down
BODY IS STRAIGHT BUT FOUND A RUSTED AREA WHERE ROOF MEETS WINDSHIELD
** took wheels off and found that the previous owner had 5x4 wheels machined to 5x4.5 so the lug holes are oblong, not too happy about that so I was gonna replace them.
Please let me know if you need more pics or info- I know I'm forgetting stuff so I will update the thread as I remember.
Body is very very straight.
I'm asking $2750, need it gone