swingin408
newb....kinda
hi guys , i havent posted since i finally brought my 74 home . i left it in Fl. while i moved around a bit and finally made my home in TX.
so i got her back to find about 20lbs of wasp nest and dirt daubers and some new rust .
im working from from to back since my largest missing part was the rear posi. which i actually just picked up yesterday (clutch sure grip 3:91 in 741 case) i think did well for $500 in fantastic drop in condition .
but i still chug along in the engine bay and now a completer re-wire with an ez harness (not fun)
as she sits she has a 360-408 stroker , cast crank 9.5:1 comp cam 284h 2.02 ported iron heads . full manual 727 w/2800 stall . i been having trouble finding all my receipts and build info , but it starting to come back . the motor only has about 30 miles since build and was only started about every 2 months for years . but after a fluid change and new fuel tank and lines it roared to life with no problem . Right now ive got a 650 Holley db and we'll see how that goes after its on the road . i foresee a larger carb since this is no way a daily car project anymore .
im also re-doing my half *** coil over system with some help from the forum and hemidenny
i have lots to do still but i'll have her back soon now that shes home with me !
i figure i at least owe some pics to the forum that has brought my project back to life !
so i got her back to find about 20lbs of wasp nest and dirt daubers and some new rust .
im working from from to back since my largest missing part was the rear posi. which i actually just picked up yesterday (clutch sure grip 3:91 in 741 case) i think did well for $500 in fantastic drop in condition .
but i still chug along in the engine bay and now a completer re-wire with an ez harness (not fun)
as she sits she has a 360-408 stroker , cast crank 9.5:1 comp cam 284h 2.02 ported iron heads . full manual 727 w/2800 stall . i been having trouble finding all my receipts and build info , but it starting to come back . the motor only has about 30 miles since build and was only started about every 2 months for years . but after a fluid change and new fuel tank and lines it roared to life with no problem . Right now ive got a 650 Holley db and we'll see how that goes after its on the road . i foresee a larger carb since this is no way a daily car project anymore .
im also re-doing my half *** coil over system with some help from the forum and hemidenny
i have lots to do still but i'll have her back soon now that shes home with me !
i figure i at least owe some pics to the forum that has brought my project back to life !