Cant read the part # and that's for a dual feed carbI used this one works like a charm with 5/16 rubber hose to the fuel pump. I have the 600cfm slayer that im in the process of tuning right now.
View attachment 1715062668
very nice set upHP440...Half inch sending unit from the tank, 8 AN teflon steel braided hose from gas tank all the way up to Mechanical Carter Street strip fuel pump.. then from fuel pump,..3/8 inch Russell steel braided rubber line up to QTF regulator, Then 3/8 dual Russell steel braided rubber lines over to QTF SS-750 carburetor
View attachment 1715062733
I used this one works like a charm with 5/16 rubber hose to the fuel pump. I have the 600cfm slayer that im in the process of tuning right now.
View attachment 1715062668