8 3/4 Brake line block

-
plumkrazee70

plumkrazee70

Well-Known Member
Joined
May 5, 2013
Messages
3,753
Reaction score
1,454
Location
Medford, Oregon
I cannot for thet life of me get the brake line out of this block. I put it in my vice and tried to put a pipe wrench on it to turn it and it just will not come loose. I'm going to try heat now but decided to check here to see if I'm missing something.

I have a replacement ready to go.

Thanks!

IMG_20190406_160420323.jpg


IMG_20190406_160409370.jpg


15545919869222587633702125199229.jpg
 
No go. I cut it down, but it looks like it doesn't in screw. I think. It's a unit. Weird.

I can't seem to find a replacement, tho. Year one, fine lines, and Mancini don't list one.

Anyone run into this??
 
I just replaced that hose and the block came attached to the hose. The part # from Rock Auto is SUN 2203912. It was also for an 83/4 rear.
 
tonysrt said:
I just replaced that hose and the block came attached to the hose. The part # from Rock Auto is SUN 2203912. It was also for an 83/4 rear.
Click to expand...

Great. Was it for a Dart ? I have newn prebent brake lines, so want to make sure it will all match up.
 
I got that # off the packing slip. I couldn't find the plastic pkg. it came in. I punched in 72 Duster with 8 3/4 rear. I just checked RA and it has that hose for the rear at $12 and change.
 
Make sure you get the right hose for the vent location. Earlier models had vent on side of hump. Later had it on the tube. The respective hoses are different lengths.
Your housing might not be oe to the car.
 
You must log in or register to reply here.
-

Back
Top