Lelo Dart * Joined Oct 10, 2012 Messages 1,518 Reaction score 470 Location Knob Noster MO. Jan 27, 2013 #26 So..... If I cut off 3/16" off each axle would that be too much? 1/8" off each would do it with no clearance so I was thinking if I did 3/16" I would have a 1/16th on each side.
So..... If I cut off 3/16" off each axle would that be too much? 1/8" off each would do it with no clearance so I was thinking if I did 3/16" I would have a 1/16th on each side.
Bad Sport HALF A BUBBLE OFF Staff member Legendary Member Joined Jun 12, 2010 Messages 44,805 Reaction score 34,730 Location The Wolverine State Jan 27, 2013 #27 That should work as long as you made sure your measurements were correct.