[FOR SALE] 8 3/4 rearend

[Douglas Smith]

8 3/4 rearend 741 case with 3.23 gear. big bolt pattern. complete rearend. It was in a 68 Barracuda. $750

$750

 

[rumblefish360]

Where is Shelburn?

 

[Douglas Smith]

Where is Shelburn?

just south of Terre Haute In.

 

[ValiantOne]

You sure it is big bolt? Does it have aftermarket axles?

 

[Douglas Smith]

Yes it big bolt pattern. 5 by4.5 Not sure on axles but look stock. I need to get to storage and measure it. But it was in a 68 Barracuda and I believe with stock spring location.

 

[Douglas Smith]

You sure it is big bolt? Does it have aftermarket axles?

Yes big bolt pattern

 

[gkmopar]

Were the axles OE that were drilled?

 

[Douglas Smith]

Were the axles OE that were drilled?

Yes looks OE. Some people are saying they didn't have a 8 3/4 big bolt pattern for a body. This is big bolt pattern and looks all stock. Center section has been replaced. Center section is not original to rearend. I pulled it out of a 68 Barracuda

 

[Douglas Smith]

This rearend is about 43.75 inches from center of spring pad to center of spring pad.

 

[cosgig]

I would assume by the spring perch dimensions that it is in fact a 66-67 B body rear end!! Shoot a closeup pic of the brakes, preferably with the drum off!!

 

[Johnny Dart]

Yes looks OE. Some people are saying they didn't have a 8 3/4 big bolt pattern for a body.

That's because they didnt.

 

[340_Dart]

More than likely a 66-67 B body housing, which actually work well in Dusters/demons. Allows for big bolt pattern and 10x 2.5" brakes, however it is not a $750 rear, more along the lines of $200 with an open differential.

 

[RPMagoo]

Here's dimensions -- DELETED __ IT WAS WRONG --

 

[crackedback]

Here's dimensions -- View attachment 1714983913

WRONG... BURN THAT CHART!!!

Biggest POS on the internet.

Link to correct lengths.
Moparts on the Web - Main Index