8.75 posi center chunk
- Thread starter 1968hemidart
- Start date
-
- Status
6pakattack
Well-Known Member
Silly question,but does Posi = Sure Grip ??
mopardude318
Well-Known Member
yes it does! he's a hemi guy he should know..."sure - grip" !!!! lol
805moparkid
Slant and AFX Guy
being a cone type i dont think it really is a "sure grip"... i think its more of an "auburn" style...
6pakattack
Well-Known Member
OK,so now you've confused the ignorant (me) !! What does that mean,more of an Auburn style ??
805moparkid
Slant and AFX Guy
as i understood it the sure grip is the Clutch Style carrier... the cone style is the Auburn...
805moparkid,
Are you POSI-tive about that? <wink, wink> <nudge, nudge>
Are you POSI-tive about that? <wink, wink> <nudge, nudge>
All mopar limited slip rear differentials are called SURE GRIP , The cone type is the bottom feeder of the 2 that were avaiable from chrysler.
Many call it the cone type an Auburn , but it is not it was made originally by Borg Warner , the currently available cone types available from Auburn now are a bigger POS than the original Borg Warner unit, they aren't rebuildable (not the the Borg warner was meant to be rebuilt)and don't last as long.
sorry for mucking up this ad.
1968hemidart
MOPAR CHARLIE
Posi is a GM Term, we at MOPAR call it Limited Slip ( sure grip ), and it is a "CONE TYPE"
Mopar Charlie
727-271-5068
they are completely rebuildable, I rebuild these units all the time, I just wanted to set the record straight, and they were produced by DANA, which by the way, Chrysler did own DANA back in the day
Mopar Charlie
727-271-5068
they are completely rebuildable, I rebuild these units all the time, I just wanted to set the record straight, and they were produced by DANA, which by the way, Chrysler did own DANA back in the day
- Status
-
