DirtyDawg
Member
I bought a supposedly new suregrip, and after I installed it and ran it awhile it started chattering a little when turning under power, when I would pull off from a stop, I put pos additive in it when I installed it but I went ahead and put another bottle in it. It only got worse, sometimes it feels like the rear is shifting forward and back, everything is tight on spring perches. Finally just took it out and tore it apart to inspect it, at first everything looked good but after digging deeper the inside of the case has some ware and I don't think the clutches are right, there are no dished disc, but does have the dished plates. What I need to know is my case alright and do I need new clutch kit.
Looks like back side of spider gears and side gear retainers are wearing into the case.
Whats going on?
Looks like back side of spider gears and side gear retainers are wearing into the case.
Whats going on?