A body Manual pedal assembly

[UCUDANT]

I know my E body Cuda has a plate that bolts inside the engine bay to support the clutch pedal assembly. Do A bodies have a similar plate?

 

[Alaskan_TA]

I'll take a photo of mine for you.

BRB......

Edit;

In my case, 1970 with a 318, 3-speed stick with HD drum brakes.

The pedal assembly studs are mated to the master cylinder for support;

 

[UCUDANT]

I'll take a photo of mine for you.

BRB......

Thanks here is a shot of the pedals I acquired and cleaned up

Thanks, the E bodies use a plate and the set up is a little different so I wanted to be sure.

 

[Alaskan_TA]

Dang. I just noticed the blue wire in my photo missing the insulation, I better look into that ASAP!

 

[UCUDANT]

Dang. I just noticed the blue wire in my photo missing the insulation, I better look into that ASAP!

Your willingness to help others has now also done you a good turn.... even better. Thanks again

 

[Alaskan_TA]

Glad to help. I have a soft spot for 3-speed stick cars.

Best of luck with yours.

 

[MoparMike1974]

I believe that is E body only. Dont know, B might have used it some years too.

 

[72bluNblu]

Those plates are a B/E body deal. No such plate on A-bodies.