[WANTED] A body Parts Wanted

[67Dart440GT]

Hey all, looking for a few things to start collecting again ha ha

Looking for a nice set of the 73+ Upper control arms with big ball joint for A-body.

Looking for the 73+ Disc brake spindles and caliper brackets.

Looking for a A body 8 3/4 housing only. Backing plates would be nice but not required.

I am in Southern Wisconsin and would rather not ship the axle.

Let me know what you have! Thanks!

 

[67Dart440GT]

I am also looking for a clean driver front frame rail. Anyone have one they can cut out of a parts car for me?

 

[3DARTDAVE]

I have a pair of upper control arms, 73 & up large ball joint for a dart.
Asking $100.00pr or obo plus ups.

Also, have the strutt rods if interested.

 

[67Dart440GT]

Hey all, looking for a few things to start collecting again ha ha



Looking for a A body 8 3/4 housing only. Backing plates would be nice but not required.

I am in Southern Wisconsin and would rather not ship the axle.

Let me know what you have! Thanks!

Found the upper control arms. Need A body 8 3/4 housing or complete with small bolt pattern. Let me know what you have!

 

[2doorswinger]

I have a complete rear drum set up available.

 

[Jadaharabi]

Hey all, looking for a few things to start collecting again ha ha

Looking for a nice set of the 73+ Upper control arms with big ball joint for A-body.

Looking for the 73+ Disc brake spindles and caliper brackets.

Looking for a A body 8 3/4 housing only. Backing plates would be nice but not required.

I am in Southern Wisconsin and would rather not ship the axle.

Let me know what you have! Thanks!

I have an 8 3/4 housing.

 

[68original]

May have frame rail but cant check until tomorrow night.

 

[winstoninwisc]

64-65 barracuda wanted I'm in Madison wisc any down there

 

[SRT_DSTRHOLC]

I have the 8 3/4 shock plates

 

[67Dart440GT]

I have an 8 3/4 housing.

PM Sent on housing.

 

[41husk]

I am also looking for a clean driver front frame rail. Anyone have one they can cut out of a parts car for me?

I have a piece from the driver side front back to the battery tray.

 

[67Dart440GT]

UPDATED* I have a driver frame rail on the way from California now.

 

[Jadaharabi]

I have an 8 3/4 housing.

The one closes to the camera is the original A body.

 

[67Dart440GT]

The one closes to the camera is the original A body.

I'll take it. See you Saturday!